MonoDAQ Power Package enables a simple connection of the MonoDAQ devices to the PC or the controller as shown in the picture below.
14 pin push-in wire terminal for MonoDAQ-U-X front end connection. 1 such wire terminal is included with each MonoDAQ-U-X.
Conductor cross section min.: 0.2 mm²
Conductor cross section max.: 1.5 mm²
Flexible conductor cross section with ferrule min.: 0.25 mm²
Flexible conductor cross section with ferrule max.: 1.5 mm² (without plastic sleeve), 1 mm² (with plastic sleeve)
DIN rail mounting bracket for a single MonoDAQ-E device.
DIN rail mounting bracket for a single MonoDAQ-E device. M4x30 screws included.
Demo kit for MonoDAQ-U-X device consisting of three connectors with sensors.
MonoDAQ analog input amplifiers can sample at 40 kS/s with this firmware upgrade. Upgrade binds to the serial number and must be purchased for each device.
Alias-free bandwidth at 40 kS/s: 16 kHz
Available for: 1xACC, 1xSTG, 1xLV