MonoDAQ-E-STG - isolated strain gauge amplifier

Isolated strain gauge amplifier with EtherCAT interface:

  • Full, half and quarter brigde (120, 350 ohm)
  • Voltage input (50 V, 10 V, 1 V 100 mV)
  • Current input (20 mA, 2 mA)
  • Voltage excitation 0..24 V unip., 0..12 V bip.
  • Current excitation 0..22 mA
  • Input coupling: DC, AC 1 Hz

Download datasheet
Download technical-drawing
What's in the box
  • 1x MonoDAQ-E-STG
  • 1x Passive PoE power injector
  • 1x USB-to-12 V power supply
  • DEWESoft X3 LT Life License with FREE updates

Reviews (3)

Assist. Prof. Dr. Matevž Zupančič, University of Ljubljana, Faculty of Mechanical Engineering
We are integrating E-STG and E-AO into stand-alone systems to measure pressure fluctuations in pipeline distribution networks. Extremely low input noise and high sample rate of the STG allows us to accurately detect and determine the source of the water-hammer phenomenon. This helps in preventing extreme pressure fluctuations and minimizes the risk of damaging process equipment.
Dirk van Baan
Very universal and precise strain gauge amplifier. Including software this is the best price on the market for all those bridge and excitation possibilities.
Daniel Wolff
Strain measurement gets much simpler using this device and DEWESoft channel setup.
Maximal Sample rate
  • 1 kS/s
  • 40 kS/s
Price (VAT excl.): 729,00€
Add to cart


USB device with reconfigurable front-end:

  • 50 kS/s, 16 bit analog voltage input (+-10 V)
  • strain gauge amplifier
  • current input with internal shunt
  • 4-channel thermocouple input
  • 8-channel multiplexed analog voltage input
  • 8-channel digital I/O
  • internal IMU and humidity sensor

Download datasheet
Download technical-drawing
What's in the box
  • 1x MonoDAQ-U-X
  • 1x USB-C to USB-A cable
  • 1x Push-in wire terminal
  • DEWESoft X3 LT Life License with FREE updates

Reviews (4)

Jure Golob, R/D, Hidria d.o.o.
Small, powerful and easy to use device. In just a matter of minutes you can prepare a setup to acquire and analyze almost every analog or digital signal or even create some outputs at the same time. I think it is a tool every engineer should have for his daily work
Gunther Alfano
You can measure strain and temperature at the same time while also controlling switches with digital outputs. Difficult to find the same functionality for this price.
Heikki Soininen
Our favorite daily data acquisition device!
Offers wide variety of front end functions for a good price. Software is easy to learn but very powerful underneath
Maximal Sample rate
  • 1 kS/s
  • 50 kS/s
Price (VAT excl.): 299,00€
Add to cart